MVU MVU-H

SYSTEM OF DRAINAGE RAILS THAT CAN ONLY BE FIXED BY ACCESS UNDERNEATH THE STRUCTURE

The MECOSUN MVU system (MVU-H reinforced version) is the economical solution for integration into all types of buildings, parking shades, pergolas, riding stables, etc. The MECOSUN MVU system (MVU-H reinforced version) is the economical solution that meets the criteria for integration into the building. A covering system composed of draining rails adaptable to all types of bare structures (no covering necessary) and to all framed solar modules meeting IEC standards. The most economical answer on the market, when access from below to the frame can be maintained while the building is in operation!

The MVU MVU-Hsystem

ADAPTABILITY & VERSATILITY

 

The MVU solution is compatible with all types of structures (steel, wood, concrete), can be fixed on ramps of up to 27 m and is suitable for roofs inclined from 5 to 50°.

The components are made to measure and cut in the factory according to your layout and constraints.

SIMPLE AND QUICK INSTALLATION

 

The modules are installed by sliding between the support rails, which saves time in their installation. The constituent parts and solar modules are fixed exclusively from below, thus guaranteeing a secure installation without access to the roof and requiring no site security measures (fall protection net, guardrails on the periphery, etc.).

TIGHTNESS

 

The MVU system (MVU-H reinforced version) allows rainwater to be drained off at the bottom of the ramp thanks to its drainage rails, which guarantees a 100% watertight installation.

RELIABILITY & LONGEVITY

 

The materials used are aluminium and stainless steel, this quality of materials ensures high resistance over time to the climatic constraints and the interior ambiences of your buildings, thus guaranteeing long-lasting installations.

The system respects the expansion constraints of the materials used and its installation does not present any zone that would allow the accumulation of dirt in order to guarantee an efficient and always clean solar field.

PERFORMANCE AND PROFITABILITY

 

The MVU system (MVU-H reinforced version) has been designed to guarantee an optimum return on your solar investment, with the lightest system cost on the market, the fastest installation time on the market, while guaranteeing the greatest ventilation of the modules and the highest performance of your solar field.

BOTTOM BRACKET

 

The MVU system is fully attached from underneath. The modules are installed by sliding to optimize the installation time. Working from underneath also offers greater safety for installers and total respect for the modules, thus avoiding the risk of micro-cracks.

EXPERIENCE

 

Last born of the MECOSUN range, the MVU system was designed and conceived with the feedback of the 350MWp of projects carried out with our solutions.

INSTALLATION OPTIMIZATION

 

This integration systemallows you toovertake the rid geand eave purlin and to install the modules in portrait or landscape format. This integration system guarantees that the layout will be optimised according to your project by allowing you to install a maximum of power on your roof structure.

Most produced

  • - Module breakdown

  • - 100% WATERPROOF

  • - MATERIALS QUALITY

  • - AESTHETICS

The Technical DataSheet

Download the data sheet by clicking on the button below

Download the sheet

Ask for a quote

Request a quote online

Ask for a quote

technical data

  • GENERAL TECHNICAL DATA
  • Adaptation on steel structure

    IPN from 80 to 180 (standard)

    IPE from 80 to 220 (standard)

    HEA from 100 to 120

    Thin sheet metal profiles (e>1.5mm)

  • Adaptation on wooden frame

    Traditional or glued laminates

  • Adaptation on concrete structure

    Purlins with metal inserts

  • Reported load

    4.5 kg/m² maximum

  • Eligible slope

    from 5° to 50° (from8% to 120%)

  • Maximum distance between failures MVU supports

    1.6m in portrait // 1.4m in landscape

  • Maximum distance between failures supports MVU-H

    2.5m in portrait // 2m in landscape

  • Authorized overrun Ridge/gutter MVU

    30 cm on each side in portrait // 15 cm in landscape

  • Authorized overrun Ridge/gutter MVU-H

    80 cm on both sides in portrait //50 cm in landscape

  • Wind zone (according to NV65)

    Zone 4 (Zone 5, depending on the case study)

  • Snow zone (according to NV65)

    Zone D - Altitude 900m (beyond that, please contact us)

  • Crawl length

    Maximum 27m (beyond these values, please consult us)

The data given above are orders of magnitude. Consult our engineering department to check the distances to be considered according to the snow and wind loads in the installation area of your project.